Heavy Duty 10 Micron Stainless Steel Mesh Screen for Projection

• Customization: Available
• Material: SS304, 304L, SS316, 316L
• Hole Shape: Square
• Application: Filter, Construction Wire Mesh, Protecting Mesh, Screen, Decorative Mesh, Barbecue Wire Mesh, Window Curtain, Mesh Clothing
• Type: Stainless Steel Plain Wire Mesh
• Material Type: Stainless Steel Wire
• Weave Technique: Plain Weave
• Wire Mesh Width: 1m, 1.2m, 1.5m Ect
• Technique: Woven
• Nickels: 0%~10%
• Certification: ISO9001
• Length of Roll: 50m
• Others: According to Your Requirement
• Diameter: 0.02-2.0mm
• Roll Size: 1*15m, 1*30m
• Mesh: 1-200
• Wire Grade: 302 304 304L 316 316L etc
• Transport Package: Carton or Wooden Box
• Specification: 4mesh, 6mesh, 8mesh, 100mesh, 400mesh.
• Trademark: weiyue
• Origin: China
• HS Code: 73144000
• Production Capacity: 1000m2 Per Day

Product Description

Stainless steel is the optimum solution for your woven mesh needs. By selecting stainless steel you will utilise its numerous benefits including:
 Long term performance
 Minimal maintenance
 Strength
 Life cycle costing
 Low environmental impact
Stocked Product Specifications ready for same day despatch

Mesh	500 inch per lineal inch (fine mesh) to 1 inch per lineal to (coarse mesh)
Weave	Plain, Twill, Lock Crimp & Inter Crimp Weave
Grade	304 & 316
Length x Width	2m Rolls / Sheets x 1245mm width 10m length x 1550mm width rolls 30m length x 1245mm, 1550mm and 1830mm width rolls

Stainless Steel Wire Mesh
Stainless steel wire mesh is used industrially today in filters, sieve and screening etc, as well as in the areas like auto, chemicals, food, electronics and aerospace industries. 

Available in Stainless steel 302 304 316 316L
Mesh	Guage	Wire dia (mm)
8	24	0.558
	26	0.457
	27	0.400
	28	0.376
10	24	0.558
	26	0.457
	28	0.376
12	24	0.558
	26	0.457
	27	0.400
	28	0.376
	30	0.315
14	24	0.558
	26	0.457
	27	0.400
16	27	0.400
	28	0.376
	30	0.315
18	26	0.457
	28	0.376
20	26	0.457
	28	0.376
	30	0.315
	32	0.274
30	30	0.315
	32	0.274
	34	0.234
40	32	0.274
	33	0.254
	34	0.234
	36	0.193
	37	0.173
50	34	0.234
	36	0.193
	38	0.152
60	34	0.234
	38	0.152
80	38	0.152
	40	0.122
	42	0.102
100	41	0.112
	42	0.102
	43	0.091
200	47	0.051
300	48	0.041
	49	0.031

Dutch Weave Filter Cloth
Plain Dutch Weave:
Plain Dutch Weave can accommodate high flow rates with a relatively low pressure drop.They are woven with each warp and weft wire passing over and under one wire.The weft wires are smaller in diameter than the warp wires and are drawn up close together,creating a dense filtration weave.

Mesh/Inch   (warp×weft)	Wire Dia.    warp×weft    (mm)	Normal size   (μm)	Effective     area%	Weight   kg/sq.m	Cloth thickness   (mm)
7×44	0.71×0.63	319	14.2	5.55	1.97
8×45	0.8×0.6	310	15.5	5.7	2.00
8×60	0.63×0.45	296	20.3	4.16	1.53
8×85	0.45×0.315	275	27.3	2.73	1.08
10×90	0.45×0.28	249	29.2	2.57	1.01
10×76	0.5×0.355	248	21.8	3.24	1.21
12×86	0.45×0.315	211	20.9	2.93	1.08
12×64	0.56×0.40	211	16.0	3.89	1.36
12×76	0.45×0.355	192	15.9	3.26	1.16
14×100	0.40×0.28	182	20.3	2.62	0.96
14×110	0.4×0.25	177	22.2	2.28	0.855
14×76	0.45×0.355	173	14.3	3.33	1.16
16×100	0.40×0.28	160	17.7	2.7	0.96
17×120	0.355×0.224	155	22.4	2.19	0.803
16×120	0.28×0.224	145	19.2	1.97	0.728
20×140	0.315×0.20	133	21.5	1.97	0.715
20×170	0.25×0.16	130	28.9	1.56	0.57
20×110	0.355×0.25	126	15.3	2.47	0.855
22×120	0.315×0.224	115	15.5	2.20	0.763
25×140	0.28×0.20	100	15.2	1.96	0.68
24×110	0.355×0.25	97	11.3	2.60	0.855
28×150	0.28×0.18	92	15.9	1.87	0.64
30×150	0.25×0.18	82	13.5	1.79	0.61
30×140	0.315×0.20	77	11.4	2.21	0.715
35×190	0.224×0.14	74	16.8	1.47	0.504
35×170	0.224×0.16	69	12.8	1.62	0.544
40×200	0.18×0.135	63	15.4	1.24	0.43
50×250	0.14×0.11	50	15.2	1	0.36
60×500	0.14×0.055	51	34.1	0.70	0.252
50×270	0.14×0.10	50	15.2	0.98	0.34
65×390	0.125×0.071	42	19.1	0.78	0.267
60×300	0.14×0.09	41	14.1	0.96	0.32
80×700	0.125×0.04	40	38.1	0.60	0.205
60×270	0.14×0.10	39	11.2	1.03	0.34
77×560	0.14×0.05	38	27.5	0.74	0.24
70×390	0.112×0.071	37	16.3	0.74	0.254
65×750	0.10×0.036	36	37.1	0.43	0.172
70×340	0.125×0.08	35	13.2	0.86	0.285
80×430	0.125×0.063	32	16.6	0.77	0.251
118×750	0.063×0.036	23	21.5	0.38	0.135

Twill dutch weave
The term "Twill" indicates the warp and weft wire pass alternately over two and under two wires.The term"Dutch" refer to the use of a heavier warp wire in conjunction with a lighter weft wire.
In a Twill Dutch Weave the weft wires are drawn up so tightly that there is always a weft wire above and below the warp wires,creating a weave with the warp wire completely covered,The flow-pass geometry is extremely tortuous,allowing reasonable flow rates while insuring excellent particle size retention.

Mesh/Inch   (warp×weft)	Wire Dia.    warp×weft    (mm)	Normal size   (μm)	Effective     area%	Weight kg/sq.m	Cloth thickness   (mm)
20×270	0.25×0.2	119	17.6	3.14	0.65
20×200	0.355×0.28	118	12.1	4.58	0.915
24×300	0.28×0.18	110	19.6	3.01	0.64
20×150	0.45×0.355	101	7.5	6.02	1.16
30×340	0.28×0.16	89	17.9	2.84	0.60
30×270	0.28×0.20	77	11.2	3.41	0.68
40×540	0.18×0.10	70	23.5	1.73	0.38
40×430	0.18×0.125	63	15.4	2.09	0.43
50×600	0.125×0.09	51	17.2	1.47	0.305
50×500	0.14×0.11	47	12	1.83	0.364
65×600	0.14×0.09	36		1.59	0.32
70×600	0.14×0.09	31	10.1	1.61
78×760	0.112×0.071		13.5	1.25	0.254
78×680	0.112×0.08	29	10.3	1.37	0.272
80×680	0.112×0.08	28	9.8	1.38
90×850	0.10×0.063	26	12.7	1.12	0.226
90×760	0.10×0.071	24	9.6	1.23	0.242
100×850	0.10×0.063	22	10	1.14	0.226
130×1500	0.063×0.036	21	18.6	0.64	0.135
100×760	0.10×0.071	20	7.4	1.25	0.242
130×1200	0.071×0.045	18	12	0.80	0.161
130×1100	0.071×0.05	17	9.4	0.87	0.171
150×1400	0.063×0.04	15	11.4	0.71	0.143
160×1500	0.063×0.036		12.4	0.67	0.135
165×1500	0.063×0.036	14	11.4
174×1700	0.063×0.032	13	12.9	0.62	0.127
165×1400	0.063×0.04		8.8	0.73	0.143
174×1400	0.063×0.04	11	7.4	0.74
203×1600	0.05×0.032	10	9.3	0.58	0.114
216×1800	0.045×0.03		9.4	0.53	0.105
203×1500	0.056×0.036	9	6.2	0.67	0.128
250×1900	0.04×0.028	8	7.8	0.51	0.096
250×1600	0.05×0.032		3.8	0.63	0.114
285×2100	0.036×0.025	7	7.2	0.44	0.086
300×2100	0.036×0.025	6	6.0
317×2100	0.036×0.025	5	4.7
325×2300	0.036×0.024	4	4.2
363×2300	0.032×0.022		4.5	0.40	0.076
400×2700	0.028×0.02		4.7	0.36	0.068
500×3500	0.025×0.015	3	4.9	0.30	0.055

Reverse Dutch Weave
Reverse dutch weave is one of special weave wire cloth used in the filtration field of plastic industry,chemical industry,etc.Comparing with the normal dutch weave,warp wire are much more than the weft wires in certain unit area,with a large absolute ratio,so this weave can supply better filtration rate.
Material:302/304/316L etc.stainless steel
(We can products with special materials according to customer's requirements)
Mesh(m):45-720
Width(m):0.097-1.2
Length:10-30(we can products with special specifications according to customer's requirements)

Mesh	Wire diameter(mm)	Filtering accuracy
63×18	0.30×0.4	200
107×20	0.24×0.4	150
175×44	0.15×0.30	80
132×32	0.20×0.40	105
290×70	0.09×0.20	55
615×102	0.04×0.16	40
720×140	0.035×0.11	15
(Special specification we can produce according to customer's requirements)

Filter belt
Standard technical parameters
Effective area of mesh:113(Can be adjust according to the requirements)
Filtering accuracy:300-70μ.m.(Can be adjust according to the mesh)
Length of mesh:10m/20m
Width of mesh:127mm.(Can be adjust)
Thickness of mesh:2.5mm.(Can be adjust)
Maximum allowable working pressure:380 bar
Advantages:
Continuous work,DO not need stop for work,Save the time and labor
Applicable in a variety of extruders
Constant melt pressure to ensure the best quality products
Applicable to a variety of materials,such as PP,HDPE,LDPE,PS,etc.
Very long service life
Easy to operate

Mesh	Wire Diameter (mm)	Thickness  (mm)	Width        (cm)
45x15	0.45x0.6	1.75	8-85
72x15	0.45x0.55	1.7	8-85
120x16	0.35x0.45	1.36	8-85
132x17	0.3x0.45	1.3	8-85
152x24	0.3x0.40	1.2	8-85
160x18	0.28x0.45	1.27	8-85
200x40	0.15x0.27	0.7	8-130
260x40	0.15 x0.27	0.65	8-130
300x40	0.15 x0.27	0.65	8-130
360x40	0.13 x0.27	0.6	8-130
Special specification we can produce according to customer's requirements