304 316 Stainless Steel Perforated Mesh Sheets for Insulation Decorative Applications

• Customization: Available
• Surface Treatment: Galvanized
• Weight: Middle-weight
• Model NO.: wywiremesh
• Application: Construction Wire Mesh, Protecting Mesh, Decorative Mesh, Filter, Sieving Diversified Pellet, Cages
• Material: Galvanized Sheet Plate
• Thickness: 0.3mm~10mm
• Hole Size: According to Your Requirement
• Width: 1.5m,2m
• Type: Perforated Mesh
• Transport Package: Pallets
• Specification: according to client′s requirement
• Trademark: weiyue
• Origin: Anping, Hebei, China
• HS Code: 73144900
• Production Capacity: 5000m2/Week
• Package Size: 100.00cm * 100.00cm * 100.00cm
• Package Gross Weight: 500.000kg

Product Description

Product Description
Perforated metal sheet it is produced from metal panels, with kinds of hole patterns, round holes, square holes, long round holes, and hexagonal holes. Perforated Metal Mesh is mainly made of metal, iron plates, galvanized plates, stainless steel, and aluminum plates are the most commonly used.
Perforated sheet products with various shapes of holes on the surface are widely used in both decoration and industry. 
 
Advantages
1.    Beautiful appearance
2.    Good air permeability
3.    Saving in material
4.    Environmental protection and energy saving
5.    Easy to process
6.    100% in house inspection before delivery

Pictures Show




Packaging
--- Carton with foam or according your demand 
--- Packaging options
1. left in sheet
2. detached
3. bulk packed
4. box in foam layer
5. pe , boxes

Photo etching technology

Using photo mask, the product pattern is copied on the metal material by the exposing machine. Then, etching it by liquid medicine. The distortion and burr will not be made by such chemical process, and the material could be kept flat. After the final washing process, the products will be very clean.

Half Etching
By exposing different patterns to the front and back side of the material, it is possible to etching single side of the metal material. The etching depth is about 2/3 of the material thickness.
Taper Etching
By etching different sizes from the front and back side of the material, a tapper hole could be made. The tapper shape could be adjusted.
No Burr and Distortion
Unlike machining or pressing, since etching is corroding the metal material by the chemical liquid, the burr or distortion will not be occurred during the process.

Our features

From prototype to mass production
Our production line both for making prototypes as will as mass production to meet a broad range of customer needs.
No bridge etching
Etching without making bridges on products is possible. Suitable for spring or complex pattern which can not have bridge.
Lined Material Etching
By using the no bridge etching technology, we could also etching the lined material for heater of heat or others products.
And the adhesive could be peeled off without heat is efficient for production.
Big size or roll material is also available. Please contact us for the details.
Available for Large Size
The max. size for our etching equipment is 1050*1750mm.
High Precision Mesh or Perforated Plate by Etching
Metal mesh products or perforated metal could be produced by etching and weaving technology of Nippon Filcon. Small quantity or large size is also available.
Short Lead time for Urgent Case
The short lead time (from 2 days ) for prototype is possible. Please contact us for the details (material, thickness, pattern, etc..)

Substrade Material

Stainless
SUS304 SUS301 SUS316 SUS430 SUS631, Others
Copper
Oxygen-free Copper, Tough Pitch Copper, Phosphor Bronze, Brass,Beryllium Copper, Other Copper material for lead frame.
Nickel Alloy
Alloy 42, Kovar, Permalloy, Nichrome, Invar Alloy, Inconel Alloy, Others
Special Metal
Molybdenum, Aluminum Alloy, Titanium Tungsten Steel, Gold, Silver, Others
Special Material
Glass, Clad Material, Glass Epoxy Board (+Metal Foil)
We also etching the material provided by customers.
Please contact us to know if the material is suitable for etching.

Hole Type




Product examples
Leadframe, electrode, metal mask, encoder, slit, speaker mesh, number plate, carrier/jig, mesh for printing, grid, discharge (the OA machine parts), design plate, EMI shielding mesh, film heater, parts for fuel cells or Lithium-ion rechargeable battery.

Description	Industry	Process Detail
JIG	Chip Industry	Etching+Compond Processing
Parts for Printer	Printer Industry	Etching+Surface Treatment
The parts for Inkjet head	Printer Industry	Etching+Compond Processing
The seperator for fuel cell	Fuel Cell Industry	Etching+Compond Processing
Encoder	Optical Industry	Etching+Surface Treatment
Metal Mask	Optical Industry	Large size etching /Surface treatment/Compond Processing
Mesh	Automotive Industry	Etching +Compond Processing
EMI Shielding Mesh	FPD Industry	PET+Cu composite film etching
Touch Panel Electrode	FPD Industry	Special composite film etching

Contact Us